Gas Engine Equipment
- Bartell Morrison model 1813SS walk behind saw
- JCB launches first American-made skid steers and track loaders
- Generac Pressure Washers
- General Equipment SG24/G Gas-Powered Surface Grinder
- Wacker Neuson wheel loader/snow removal machine
- Dynapac LF Series Plate Compactors
- Jenny Products Belt-Drive Cold Pressure Washers
Jobsite Heaters
- Mi-T-M launches forced air heater line
- Heatstar heavy duty multi-fuel portable forced air heaters
- Sureheat Multi-fuel Forced Air Heaters
Bartell Morrison model 1813SS walk behind saw
Bartell Morrison is proud to introduce the latest walk behind saw from their IDP division. This is our first in a series of heavy duty saws that in most cases are overbuilt, yet still competitively priced.
While it was designed primarily as an 18" capacity push saw, it also can function as a "pot hole" saw. By simply equipping this unit with the optional dual cutting kit, it will make parallel cuts exactly 20" wide with 14" diameter blades. This gives the user the opportunity to make clean square 20" cuts in only two passes and is perfect for municipalities, or anyone working on pot hole repair.
Model 1813SS – additional features:
- 18" single blade capacity or dual side cutting with up to 14" diameter blades.
- Honda GX390 series engine rated at 13 HP.
- 2" wide single serpentine belt for perfect power transmission.
- 1/4" and 3/8" plate steel "landing gear".
- Sealed wheel bearings for ease of maintenance.
- Quick release blade guard and dual side cutting capability.
- Steel water feed tubes for even blade cooling.
- Heavy duty acme thread height adjustment "booted" for continuous ease of movement.
- Optional water kit available (shown in picture above).
- Quick release pointer.
JCB launches first American-made skid steers and track loaders
JCB introduces an exciting new line of highly productive and reliable skid steer loaders and compact track loaders. These "New Generation" machines are the first to not only be manufactured but also designed and engineered at the company's North American headquarters in Savannah, Ga.
The line includes seven new skid steers—four wheeled and three tracked—in a range that will eventually grow to 18 models. All seven machines are vertical lift, which allows for increased capacity and more reach at maximum lift height. The models now available—the 260, 280, 300 and 330 wheeled skid steers and 260T, 300T, 320T compact track loaders—are large platform machines with rated operating capacities (ROC) of 2,600 pounds and above. With the introduction of the New Generation machines, JCB will be able to offer a complete range of wheeled and tracked machines, both radial and vertical lift, ranging from 1300-3500 pounds.
The new generation machines benefit from a number of new features, including:
- A tilting cab with increased service access
- Multifunction joysticks
- A hydraulic quick hitch Isolated cab that is sealed and pressurized with reduced noise levels
- Heated air-suspension seat with adjustable armrests
- O-ring face seals for all hydraulic connections
- A new range of more than 30 types of JCB attachments
By combining JCB's history of innovation with a number of additional enhancements, the New Generation machines offer an even wider range of benefits than the company's previous skid steer and compact track loader product line:
Best-in-class visibility. The new vertical lift machines showcase JCB's unique "PowerBoom" design, which uses a single arm, rather than the conventional two arm skid steer design. The JCB models do not require a torque tube across the back of the machine. Thus, operators can enjoy an unobstructed rear view and better all around visibility for unmatched job site safety and driver confidence. To further enhance visibility JCB has eliminated the mesh screen on the cab machines and replaced it with laminated glass.
Best-in-class serviceability. With O-ring face seal hydraulic fittings and a simplified design resulting in 38 percent fewer parts, JCB's new machines are even easier to service. A new tilting cab design gives technicians improved access to the machine's power train and hydraulic components. The new models also feature a rear service door for easy access to the engine and daily checkpoints, a top-opening hood for radiator access and a hinged radiator for improved engine access.
Outstanding operator comfort. The new generation machines have a larger entry door and a 17% larger cab than previous models. JCB has also introduced multifunction joystick controls and an optional heated air-suspension seat with adjustable armrests. Control panels have been relocated to be within the operator's line of sight. Other available creature comforts include cup holders, MP3 player compartment with charging outlet and auxiliary plug, optional stereo package and an electronic throttle. Operators will also enjoy a quieter cab with noise levels at a very low 76dBa, an 85% improvement.
Versatility and performance. Switching to any of the machine's impressive 30 attachment families is a snap thanks to a standard universal mechanical hitch or an optional hydraulic quick hitch. Parallel lift and 2-speeds make it easy to maneuver around the job site and complete more tasks in less time, and with the introduction of an optional Smooth Ride System (SRS) transporting materials over rough terrain has been made easier.
Unmatched safety. As in previous models, the New Generation skid steers and compact track loaders feature a unique left side entry door that allows the operator to enter and exit the machine clear of the attachment and loader arm, making it the industry's safest skid steer.
Exceptional value. Owning a JCB skid steer or tracked loader costs less due to increased productivity and serviceability. Overall fuel consumption has been reduced 15% equating to an estimated annual savings of more than $3,000 versus competitive machines (based on an off-road diesel price of $2.90).
Generac Pressure Washers
Generac reenters the pressure washer market with an all-new lineup of commercial and residential-grade pressure washers.
“Pressure washers are a perfect fit for Generac,” said Peter Chiello, senior product manager, Generac Power Systems. “They represent a natural evolution for us, especially given our expertise in portable generator design, and our previous work on pressure washers. We’re excited about our new line of pressure washers because we believe they really address what our customers are looking for—quality, value and ease of use.”
Generac conducted extensive research with users to learn what they wanted from pressure washers, and incorporated many new design elements to address those needs. These include a Generac overhead valve (OHV) horizontal-shaft engine on every pressure washer. Many competitive consumer-grade pressure washers use vertical-shaft engines. Generac horizontal-shaft engines make the pumps more accessible by positioning them well above the ground so users don’t have to kneel down to make hose connections.
Additionally, Generac OHV engines come standard with low-oil shutdown—a feature that is not available on many competitive engines—to protect and prolong the life of the engine. As for power, each engine is the largest available for pressure washers with these pressure ratings. Both the engine and pump are perfectly balanced over the axle a nd wheels for almost effortless maneuverability, regardless of terrain.
Generac also completely redesigned the spray gun to feature a soft grip that reduces fatigue, and an inverted fulcrum spray trigger that can be pulled and held with only a minimum of effort. Each spray gun also features Quick-Click nozzle tips that are easy to replace without turning the pressure washer off. On Generac’s commercial-grade units, the spray gun also comes with an adjustable auxiliary handle for additional comfort and control when cleaning.
Generac commercial-grade pressure washers feature a welded steel frame to protect the engine and pump from the rigors of professional use. Both the residential and commercial-grade units feature tool-free assembly, making it fast and easy to assemble and use the pressure washer out of the box.
Generac is introducing three residential-grade pressure washer models and three commercial-grade pressure washers:
Residential Commercial
2500 PSI @ 2.3 GPM 3000 PSI @ 2.8 GPM
2700 PSI @ 2.3 GPM 3300 PSI @ 3.2 GPM
3000 PSI @ 2.7 GPM 4000 PSI @ 4.0 GPM
The full line of Generac pressure washers will be available for sale in spring 2011.
General Equipment SG24/G Gas-Powered Surface Grinder
General Equipment Company's SG24/G gasoline powered surface grinder features various grinding systems for breaking up deposits; cleaning concrete, asphalt and tile; producing exposed aggregate slabs; and polishing delicate surfaces. The twin counter-rotating discs can work a 24"x12" area.
Powered by industrial quality 11-horsepower engines, it features dual V-belt/spur gear transmission. The SG24/G has a unitized, welded steel plate frame and extra capacity self-aligning ball bearing units.
The operator can position the adjustable handle for own individual height. Caster wheel height adjusts to accommodate different multi-accessory options.
The SG24/G air cleaner is either cyclone and/or dual element equipped. The counter-rotating discs can be removed so that an operator can attach standard 10" diameter, multi-segmented dry diamond discs for other applications such as removing plastic overlays and epoxy.
Power options include various industrial quality 11-horsepower gasoline engines with optional conversion to LP gas or 2-horsepower electric motor with dual range 115/230 AC voltage.
In business for more than 50 years, General Equipment Company is a family-owned manufacturer of earth augers, ventilation blowers, asphalt cutters and surface preparation equipment. For more information, contact General Equipment Co., 620 Alexander Drive S.W., Owatonna, MN 55060, call 507-451-5510 or 800-533-0524, fax 507-451-5511 or 877-344-4375(DIGGER5), or visit the Web site at www.generalequip.com.
Wacker Neuson wheel loader/snow removal machine
Wacker Neuson's WL 30 articulated wheel loader can easily be transferred from a summer-time "jack-of-all-trades" to a versatile snow removal machine. When outfitted for snow removal, the WL 30 is narrow enough to fit on sidewalks and, when you add one of the many easy to install attachments, snow removal is fast, easy and comfortable.
The WL 30 offers a spacious, heated cab, adjustable seat, plenty of legroom and intuitive controls that all contribute to a comfortable operating experience. The side door allows operators to easily and safely enter and exit the unit.
The WL 30 comes standard with powerful working and driving lights, plus an excellent 360-degree view provides operators with the best possible visibility.
The WL 30 has an on-demand differential lock providing excellent traction and the four-wheel drive with articulated steering offers outstanding maneuverability especially in confined areas. The low overall height also allows the machine to work under sidewalk canopies and other structures.
Snow removal contractors will appreciate the low operating costs, with up to 30% lower fuel consumption compared to skid-steer loaders and less tire wear.
And when winter is over, you still have the ultimate machine for all seasons. Wacker Neuson's compact wheel loaders are quickly becoming the perfect alternative to skid loaders by performing the same tasks faster and more smoothly. The Wacker Neuson line features articulated machines that offer excellent maneuverability and a wide choice of power and performance ratings. The all-wheel steer models are comfortable to operate and provide excellent stability on job sites with steep grades and rough terrain. The full line of attachments provides additional versatility on the job.
For more information, please visit www.wackerneuson-snow.com
Dynapac LF Series plate compactors
Dynapac’s new series of LF forward compaction plates feature improved speed, flexibility and performance.
Engineered for asphalt applications and available with a number of options to customize the plates, the new models are approximately 20 percent faster than their predecessors. The Dynapac LF75 and LF100 plates are easily convertible from soil to asphalt applications and feature a specially engineered bottom plate and a unique water distribution system to provide unequalled results for all types of asphalt jobs.
The bottom plate is the most critical component of a forward plate for asphalt compaction. The new Dynapac LF series bottom plate has been designed so its edges give a well-defined contact surface that will leave no marks on the mat.
The Dynapac LF series also features a unique patented water distribution system that is integrated into the bottom plate. Water consumption is optimized by means of a flow adjustment valve that is easily reached by the operator. A large removable water tank with a secured cap makes refills swift, simple and less frequent; this also allows for longer shift operation and more output per day. Maintenance is easier as well because there are no pipes or sprinklers to clean.
The Dynapac LF75 and LF100 weigh 165 pounds and 205 pounds respectively. The LF75 is available with a Honda engine and a 16.5-inch bottom plate. The LF100 is available in a gas or diesel option and features a 20-inch-wide bottom plate.
The LF series is equipped with Dynapac’s Low-Vib handle, which reduces exposure to hand-arm transmitted vibrations and increases operator comfort. For tight spaces, the handle is aligned with the center of the plate for easy maneuverability. The handle can be raised to a vertical operational position, and then easily folded for transportation and storage.
All models offer a wide variety of optional equipment such as lifting handles, block paving kits and a protection frame suitable for rental applications, all of which makes it possible to customize the machine.
| Model | Plate Size | Engine |
| LF75 | 16.5 inches | Honda |
| LF100 | 20 inches | Honda or Hatz |
For further details, contact Fabian Salinas, product manager, Concrete and Light Compaction Equipment; E-mail: fabian.salinas@dynapac.com
Jenny Belt-Drive Cold Pressure Washers
Steam Jenny, a product division of Jenny Products, Inc., introduces four new models of belt-drive cold pressure washers.
Designed for heavy use, belt-drive pressure washers provide a longer pump life than direct-drive units. The extended service life is due to the pulley system, which turns the pump significantly slower than if the pump was coupled with the engine crankshaft. Additionally, the belt absorbs engine vibration and allows the pump to be located farther away from the engine heat. All models are designed for maximum durability and portability to meet the demands of commercial-duty applications.
The pressure washers are powered by 9- or 13-horsepower Honda GX Series engines, and all models feature a triplex ceramic plunger pump, which provides years of service while requiring little maintenance. The units offer an ideal balance between power and volume. They are available with pressure ratings between 3,000 and 4,000 psi, and flow rates vary between 3 and 4 gpm. Furthermore, a customizable option allows customers to choose a unit with pressure and flow ratings based on their specific needs.
Many standard features are incorporated into the line to ensure long service life. These include thermal pump protection, an unloader valve and a high-pressure relief valve to prevent damage to the pump. To protect the engine, the unit will automatically shut down if low oil levels are detected.
The chassis is made with powder-coated, seven-gauge steel for enhanced durability.
Other standard items include a professional-grade insulated trigger gun with safety lock, quick-connect nozzles with nozzle control, high capacity in-line water strainer, gun/wand holder, hose reel mounting adapter and dual rubber isolators.
The chassis is backed by a 7-year limited warranty, and other components are covered by a 1-year limited warranty.
For maximum maneuverability, the pressure washers feature ball bearing wheels on a solid axle. The flat-free pneumatic tires are ideal for moving over any terrain.
Jenny offers multiple guns, lances, extensions and spray tips to accommodate any job. Hoses are available in various lengths and pressure ratings, and optional quick-connect kits allow components to be switched easily. Turbo (rotating) nozzles and chemical injection systems are also offered as options to provide superior cleaning performance. Belt-drive pressure washers are available with a factory-installed electric start kit.
Jobsite Heaters
Mi-T-M launches forced air heater line
Mi-T-M Corporation introduces a new line of portable space heaters.
This new line compliments the company’s industrial product line offering of pressure washers, air compressors, generators, wet/dry vacuums, jobsite boxes and water treatment systems.
Mi-T-M Corporation will market a wide range of portable space heaters that are safe, efficient and easy to operate. “We recognized a need for a quality-built space heater program,” says Dana Schrack, Vice President, “and our current customers can’t wait to get their hands on these machines.”
The Mi-T-M portable space heaters are designed to save energy and offer the perfect heating solution for a multitude of applications, such as workshops, garages, construction sites and farm buildings. And, to meet the demand for clean, quiet and instant heat in an outdoor social setting, Mi-T-M is introducing an Outdoor Patio heater that is perfect for patios and restaurants. The full line of Mi-T-M portable space heaters will include:
Kerosene Forced Air Heaters in 70,000 to 400,000 BTUs
Propane Force Air Heaters in 50,000 to 375,000 BTUs
Propane Convection Heaters in 50,000 to 200,000 BTUs
Kerosene Radiant Heater 125,000 BTU
Radiant Propane Tank Top Heaters 9,000 BTU to 30,000 BTU
Propane Patio Heaters 40,000 BTU
Heatstar targets construction and rental markets with new heavy duty multi-fuel portable forced air heaters
Heatstar by Enerco continues to assert itself in the construction and rental markets with its upgraded Heatstar HD Line of portable multi-fuel forced-air heaters.
The new Heatstar HD forced-air heater line is designed to meet the demands of rugged onsite use with heavy-duty high-output fans, beefed-up handles, 10" pneumatic tires, large capacity fuel tanks and a broad range of sizes from 50,000 to over 610,000 BTU’s.
The line includes seven heaters consisting of two compact units (50,000 and 75,000 BTU/HR); three wheeled units (125,000, 175,000 and 210,000 BTU/HR) and two large direct-fired heaters (360,000 and 610,000 BTU/HR) with the power to heat up to 114,000 square feet.
All Heatstar HD multi-fuel heaters operate using kerosene, No.1 or No. 2 diesel, JP8 or Jet A fuel and will operate in sub-zero temperatures.
"As more contractors become familiar with Heatstar, they'll see that we’re dedicated to delivering quality and performance," states Tim Jedrzejek, Heatstar’s National Sales Manager for Rental / Construction. “Our customers benefit by having the support of knowledgeable customer service techs and design engineers who are continually working to add new features and improvements.”
In addition to the new HD forced-air heaters, Heatstar offers a full line of portable heating options including propane and natural gas forced-air heaters, radiant and convection construction heaters, indirect heaters and tank-top radiant heaters.
www.heatstarbyenerco.com
Sureheat Multi-fuel Forced Air Heaters
Reliable heat from a variety of fuels.
Sureheat’s ReddyHeater brand Professional Series 215,000 BTU Multi-fuel Forced Air Heater is CSA certified for #1 & #2 kerosene, #1 & #2 diesel, #1 & #2 fuel oil, Jet-A and J.P. fuels.
It runs for eight hours on one 13.5 gallon tank and features hot-surface ignition and enhanced digital diagnostics and thermostat for automatic temperature control.